Rosen D, Jiang J: Modeling uncertainty of strain ratio measurements in ultrasound breast strain elastography: a factorial experiment. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 67(2):258-268, 2020. DOI.
Penrose F, Cox P, Kemp G, Jeffery N: Functional morphology of the jaw adductor muscles in the Canidae. The Anatomical Record, (in press) 2020. DOI.
Lashkarinia SS, Çoban G, Ermek E, Çelik M, Pekkan K: Spatiotemporal remodeling of embryonic aortic arch: stress distribution, microstructure, and vascular growth in silico. Biomechanics and Modeling in Mechanobiology, (in press) 2020. DOI.
Soleimani M, Funnell WRJ, Decraemer WF: A Non-linear Viscoelastic Model of the Incudostapedial Joint. Journal of the Association for Research in Otolaryngology, 21(1):21-32, 2020. DOI.
Chang B, Reighard C, Flanagan C, Hollister S, Zopf D: Evaluation of human nasal cartilage nonlinear and rate dependent mechanical properties. Journal of Biomechanics, 100:109549, 2020. DOI.
Shegaf A, Speirs A: Cartilage biomechanical response differs under physiological biaxial loads and uniaxial cyclic compression. Journal of Biomechanical Engineering, 142(5) 2020. DOI.
Guo L, Vardakis JC, Chou D, Ventikos Y: A multiple-network poroelastic model for biological systems and application to subject-specific modelling of cerebral fluid transport. International Journal of Engineering Science, 147 2020. DOI.
Moerman KM, Fereidoonnezhad B, McGarry JP: Novel hyperelastic models for large volumetric deformations. International Journal of Solids and Structures, 193-194:474-491, 2020. DOI.
Pellicer-Valero OJ, Rupérez MJ, Martínez-Sanchis S, Martín-Guerrero JD: Real-time biomechanical modeling of the liver using Machine Learning models trained on Finite Element Method simulations. Expert Systems with Applications, 143 2020. DOI.
Meister F, Passerini T, Mihalef V, Tuysuzoglu A, Maier A, Mansi T: Deep learning acceleration of Total Lagrangian Explicit Dynamics for soft tissue mechanics. Computer Methods in Applied Mechanics and Engineering, 358 2020. DOI.
Mengoni M: Using inverse finite element analysis to identify spinal tissue behaviour in situ. Methods, (in press) 2020. DOI.
Schwaner SA, Feola AJ, Ethier CR: Factors affecting optic nerve head biomechanics in a rat model of glaucoma. Journal of The Royal Society Interface, 17(165) 2020. DOI.
Gaffney BMM, Clohisy JC, Van Dillen LR, Harris MD: The association between periacetabular osteotomy reorientation and hip joint reaction forces in two subgroups of acetabular dysplasia. Journal of Biomechanics, 98 2020. DOI.
Ganesh T, Laughrey LE, Niroobakhsh M, Lara-Castillo N: Multiscale finite element modeling of mechanical strains and fluid flow in osteocyte lacunocanalicular system. Bone, (in press) 2020. DOI.
Zhou M, Bezci SE, O’Connell GD: Multiscale composite model of fiber-reinforced tissues with direct representation of sub-tissue properties. Biomechanics and Modeling in Mechanobiology, 19(2):745-759, 2020. DOI.
Rodríguez-Sánchez AE, Ledesma S, Vidal-Lesso A, Ledesma-Orozco E: The use of neural networks and nonlinear finite element models to simulate the temperature-dependent stress response of thermoplastic elastomers. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234(3):425-437, 2020. DOI.
Villamor E, Monserrat C, Del Río L, Romero-Martín JA, Rupérez MJ: Prediction of osteoporotic hip fracture in postmenopausal women through patient-specific FE analyses and machine learning. Computer Methods and Programs in Biomedicine, (in press 2020. DOI.
Amrani G, Gefen A: Which endotracheal tube location minimises the device-related pressure ulcer risk: The centre or a corner of the mouth? International Wound Journal, 17(2):268-276, 2020. DOI.
Lustig M, Wiggermann N, Gefen A: How patient migration in bed affects the sacral soft tissue loading and thereby the risk for a hospital-acquired pressure injury. International Wound Journal, (in press) 2020. DOI.
Al-Barghouthi A, Lee S, Solitro GF, Latta L, Travascio F: Relationships Among Bone Morphological Parameters and Mechanical Properties of Cadaveric Human Vertebral Cancellous Bone. JBMR Plus, (in press) 2020. DOI.
Chen S, Scott J, Bush TR, Roccabianca S: Inverse finite element characterization of the human thigh soft tissue in the seated position. Biomechanics and Modeling in Mechanobiology, 19(1):305-316, 2020. DOI.
Saeidi M, Gubaua JE, Kelly P, Kazemi M, Besier T, Dicati GWO, Pereira JT, Neitzert T, Ramezani M: The influence of an extra-articular implant on bone remodelling of the knee joint. Biomechanics and Modeling in Mechanobiology, 19(1):37-46, 2020. DOI.
Zhao Y, Feng B, Lee J, Lu N, Pierce DM: A multi-layered model of human skin elucidates mechanisms of wrinkling in the forehead. Journal of the Mechanical Behavior of Biomedical Materials, 105 2020. DOI.
Torres WM, Spinale FG, Shazly T: Speckle-tracking echocardiography enables model-based identification of regional stiffness indices in the left ventricular myocardium. Cardiovascular Engineering and Technology, 11(2):176-187, 2020. DOI.
Mountris KA, Bourantas GC, Millán D, Joldes GR, Miller K, Pueyo E, Wittek A: Cell-based maximum entropy approximants for three-dimensional domains: Application in large strain elastodynamics using the meshless total Lagrangian explicit dynamics method. International Journal for Numerical Methods in Engineering, 121(3):477-491, 2020. DOI.
Han G, Eriten M, Henak CR: Rate-dependent adhesion of cartilage and its relation to relaxation mechanisms. Journal of the Mechanical Behavior of Biomedical Materials, 102 2020. DOI.
Zhao Y, Feng B, Lee J, Lu N, Pierce DM: A multi-layered computational model for wrinkling of human skin predicts aging effects. Journal of the Mechanical Behavior of Biomedical Materials, 103 2020. DOI.


Song K, Anderson AE, Weiss JA, Harris MD: Musculoskeletal models with generic and subject-specific geometry estimate different joint biomechanics in dysplastic hips. Computer Methods in Biomechanics and Biomedical Engineering, (in press) 2019. DOI.
Phuntsok R, Ellis BJ, Herron MR, Provost CW, Dailey AT, Brockmeyer DL: The occipitoatlantal capsular ligaments are the primary stabilizers of the occipitoatlantal joint in the craniocervical junction: a finite element analysis. Journal of Neurosurgery: Spine, (in press) 2019. DOI.
Lee W, Kalashnikov N, Mok S, Halaoui R, Kuzmin E, Putnam AJ, Takayama S, Park M, McCaffrey L, Zhao R, Leask RL, Moraes C: Dispersible hydrogel force sensors reveal patterns of solid mechanical stress in multicellular spheroid cultures. Nature Communications, 10(1):144, 2019. DOI.
Li G, Lee C, Agrahari V, Wang K, Navarro I, Sherwood JM, Crews K, Farsiu S, Gonzalez P, Lin C-W, Mitra AK, Ethier CR, Stamer WD: In vivo measurement of trabecular meshwork stiffness in a corticosteroid-induced ocular hypertensive mouse model. Proceedings of the National Academy of Sciences, 116(5):1714-1722, 2019. DOI.
Wyatt H, Safar A, Clarke A, Evans SL, Mihai LA: Nonlinear scaling effects in the stiffness of soft cellular structures. Royal Society Open Science, 6(1):181361, 2019. DOI.
Shim JJ, Maas SA, Weiss JA, Ateshian GA: A Formulation for Fluid Structure-Interactions in FEBio Using Mixture Theory. Journal of Biomechanical Engineering, (in press) 2019. DOI.
Schwartz D, Gefen A: The biomechanical protective effects of a treatment dressing on the soft tissues surrounding a non-offloaded sacral pressure ulcer. International Wound Journal, (in press) 2019. DOI.
Yang B, Lu Y, Um C, O'Connell G: Relative Nucleus Pulposus Area and Position Alters Disc Joint Mechanics. Journal of Biomechanical Engineering, (in press) 2019. DOI.
Wang R, Sarntinoranont M: Biphasic analysis of rat brain slices under creep indentation shows nonlinear tension-compression behavior. Journal of the Mechanical Behavior of Biomedical Materials, 89:1-8, 2019. DOI.
Mahmood F, Clarke J, Riches P: The ionic contribution of proteoglycans to mechanical stiffness of the meniscus. Medical Engineering & Physics, 64:23-27, 2019. DOI.
Krähenbühl N, Lenz AL, Lisonbee R, Deforth M, Zwicky L, Hintermann B, Saltzman CL, Anderson AE, Barg A: Imaging of the subtalar joint: A novel approach to an old problem. Journal of Orthopaedic Research, (in press) 2019. DOI.
Tabernero A, Baldino L, Cardea S, Martín del Valle E, Reverchon E: A Phenomenological Approach to Study Mechanical Properties of Polymeric Porous Structures Processed Using Supercritical CO2. Polymers, 11(3):485, 2019. DOI.
Wang H, Kang H, Yao J, Cheng C-K, Woo SLY: Evaluation of a magnesium ring device for mechanical augmentation of a ruptured ACL: Finite element analysis. Clinical Biomechanics, 68:122-127, 2019. DOI.
Abass A, Stuart S, Lopes BT, Zhou D, Geraghty B, Wu R, Jones S, Flux I, Stortelder R, Snepvangers A, Leca R, Elsheikh A: Simulated optical performance of soft contact lenses on the eye. PLOS ONE, 14(5):e0216484, 2019. DOI.
Garbey M, Casarin S, Berceli SA: A versatile hybrid agent-based, particle and partial differential equations method to analyze vascular adaptation. Biomechanics and Modeling in Mechanobiology, 18(1):29-44, 2019. DOI.
Fatemifar F, Feldman M, Clarke G, Finol EA, Han H-C: Computational modeling of human left ventricle to assess the role of trabeculae carneae on the diastolic and systolic functions. Journal of Biomechanical Engineering, (in press) 2019. DOI.
Visentin F, Groenhuis V, Maris B, Dall’Alba D, Siepel F, Stramigioli S, Fiorini P: Iterative simulations to estimate the elastic properties from a series of MRI images followed by MRI-US validation. Medical & Biological Engineering & Computing, 57(4):913-924, 2019. DOI.
Levy A, Kottner J, Gefen A: Release of sodium pyruvate from sacral prophylactic dressings: A computational model. International Wound Journal, (in press) 2019. DOI.
Karakashian K, Pike C, van Loon R: Computational investigation of the Laplace law in compression therapy. Journal of Biomechanics, 85:6-17, 2019. DOI.
Lee J-J, Talman L, Peirce SM, Holmes JW: Spatial scaling in multiscale models: methods for coupling agent-based and finite-element models of wound healing. Biomechanics and Modeling in Mechanobiology, (in press) 2019. DOI.
Han G, Eriten M, Henak CR: Rate-dependent crack nucleation in cartilage under microindentation. Journal of the Mechanical Behavior of Biomedical Materials, 96:186-192, 2019. DOI.
Drew AJ, Tashjian RZ, Henninger HB, Bachus KN: Sex and laterality differences in medullary humerus morphology. The Anatomical Record, (in press) 2019. DOI.
Erdemir A, Besier TF, Halloran JP, Imhauser CW, Laz PJ, Morrison TM, Shelburne KB: Deciphering the “art” in modeling and simulation of the knee joint: Overall strategy. Journal of Biomechanical Engineering, 141(7):71002-71010, 2019. DOI.
Chen Z, Lu J, Zhang C, Hsia I, Yu X, Marecki L, Marecki E, Asmani M, Jain S, Neelamegham S, Zhao R: Microclot array elastometry for integrated measurement of thrombus formation and clot biomechanics under fluid shear. Nature Communications, 10(1):2051, 2019. DOI.
Shi X, Liu Y, Copeland KM, McMahan SR, Zhang S, Butler JR, Hong Y, Cho M, Bajona P, Gao H, Liao J: Epicardial prestrained confinement and residual stresses: a newly observed heart ventricle confinement interface. Journal of The Royal Society Interface, 16(152):20190028, 2019. DOI.
Atzeni F, Lanfranconi F, Aegerter CM: Disentangling geometrical, viscoelastic and hyperelastic effects in force-displacement relationships of folded biological tissues. The European Physical Journal E, 42(4):47, 2019. DOI.
Elenes EY, Rausch MK, Rylander CG: Parametric study of the design variables of an arborizing catheter on dispersal volume using a biphasic computational model. Journal of Engineering and Science in Medical Diagnostics and Therapy, 2(3):31002-31009, 2019. DOI.
Friedman R, Haimy A, Epstein Y, Gefen A: Evaluation of helmet and goggle designs by modeling non-penetrating projectile impacts. Computer Methods in Biomechanics and Biomedical Engineering, 22(3):229-242, 2019. DOI.
Peko Cohen L, Ovadia-Blechman Z, Hoffer O, Gefen A: Dressings cut to shape alleviate facial tissue loads while using an oxygen mask. International Wound Journal, 16(3):813-826, 2019. DOI.
Lin X, Liu Y, Bai A, Cai H, Bai Y, Jiang W, Yang H, Wang X, Yang L, Sun N, Gao H: A viscoelastic adhesive epicardial patch for treating myocardial infarction. Nature Biomedical Engineering, (in press) 2019. DOI.
Yang B, O’Connell GD: GAG content, fiber stiffness, and fiber angle affect swelling-based residual stress in the intact annulus fibrosus. Biomechanics and Modeling in Mechanobiology, 18(3):617-630, 2019. DOI.
Lenz AL, Krähenbühl N, Howell K, Lisonbee R, Hintermann B, Saltzman CL, Barg A: Influence of the ankle position and X-ray beam angulation on the projection of the posterior facet of the subtalar joint. Skeletal Radiology, (in press) 2019. DOI.
Killian ML, Locke RC, James MG, Atkins PR, Anderson AE, Clohisy JC: Novel model for the induction of postnatal murine hip deformity. Journal of Orthopaedic Research, 37(1):151-160, 2019. DOI.
Friedman R, Haimy A, Gefen A, Epstein Y: Three-dimensional biomimetic head model as a platform for thermal testing of protective goggles for prevention of eye injuries. Clinical Biomechanics, 64:35-41, 2019. DOI.
Phung T-KN, Waters C, Holmes JW: Open-source routines for building personalized left ventricular models from cardiac MRI data. Journal of Biomechanical Engineering, (in press) 2019. DOI.
Ün MK, Çalık A: Estimation of depth-dependent material properties of biphasic soft tissues through finite element optimization and sensitivity analysis. Medical Engineering & Physics, 74:73-81, 2019. DOI.
Ikejimba LC, Salad J, Graff CG, Ghammraoui B, Cheng W-C, Lo JY, Glick SJ: A four-alternative forced choice (4AFC) methodology for evaluating microcalcification detection in clinical full-field digital mammography (FFDM) and digital breast tomosynthesis (DBT) systems using an inkjet-printed anthropomorphic phantom. Medical Physics, 46(9):3883-3892, 2019. DOI.
Patnaik S.; Pillalamarri, N.R.; Romero, G.; Escobar, G.P.; Sprague, E.; Finol, E.A. SS; P: Biomechanical restoration potential of pentagalloyl glucose after arterial extracellular matrix degeneration. Bioengineering, 6(3):58, 2019.
Uemura K, Atkins PR, Peters CL, Anderson AE: The effect of pelvic tilt on three-dimensional coverage of the femoral head: A computational simulation study using patient-specific anatomy. The Anatomical Record, (in press) 2019. DOI.
Cooper RJ, Wilcox RK, Jones AC: Finite element models of the tibiofemoral joint: A review of validation approaches and modelling challenges. Medical Engineering & Physics, 74:1-12, 2019. DOI.
Yang B, O'Connell GD: Intervertebral disc swelling maintains strain homeostasis throughout the annulus fibrosus: A finite element analysis of healthy and degenerated discs. Acta Biomaterialia, 100:61-74, 2019. DOI.
Mielke M, Nyakatura JA: Bone microstructure in finite element modeling: the functional role of trabeculae in the femoral head of Sciurus vulgaris. Zoomorphology, 138(4):535-547, 2019. DOI.
MacManus DB, Maillet M, O'Gorman S, Pierrat B, Murphy JG, Gilchrist MD: Sex- and age-specific mechanical properties of liver tissue under dynamic loading conditions. Journal of the Mechanical Behavior of Biomedical Materials, 99:240-246, 2019. DOI.
Cadel ES, Frazer LL, Krech ED, Fischer KJ, Friis EA: Analysis of how compliant layers and encapsulation affect power generated from piezoelectric stacked composites for bone healing medical devices. Journal of Biomedical Materials Research Part A, 107(12):2610-2618, 2019. DOI.
Moore B.T.; Eliasy, A.; Geraghty, B.; Wu, R.; White, L.; Elsheikh, A.; Abass, A. J; L: Simulation of the effect of material properties on soft contact lens on-eye power. Bioengineering, 6(4):94, 2019.
Safa BN, Santare MH, Elliott DM: A reactive inelasticity theoretical framework for modeling viscoelasticity, plastic deformation, and damage in fibrous soft tissue. Journal of Biomechanical Engineering, 141(2) 2019. DOI.
Korenczuk CE, Dhume RY, Liao KK, Barocas VH: Ex vivo mechanical tests and multiscale computational modeling highlight the importance of intramural shear stress in ascending thoracic aortic aneurysms. Journal of Biomechanical Engineering, 141(12) 2019. DOI.
Zellmann I.; Handschuh, S.; Peham, C. P; R: Finite element modelling simulated meniscus translocation and deformation during locomotion of the equine stifle. Animals, 9(8):502, 2019.
Shi L, Yao W, Gan Y, Zhao LY, Eugene McKee W, Vink J, Wapner RJ, Hendon CP, Myers K: Anisotropic material characterization of human cervix tissue based on indentation and inverse finite element analysis. Journal of Biomechanical Engineering, 141(9) 2019. DOI.
Routzong MR, Moalli PA, Maiti S, Vita RD, Abramowitch SD: Novel simulations to determine the impact of superficial perineal structures on vaginal delivery. Interface Focus, 9(4) 2019. DOI.
Pan W, Roccabianca S, Basson MD, Bush TR: Influences of sodium and glycosaminoglycans on skin oedema and the potential for ulceration: a finite-element approach. Royal Society Open Science, 6(7) 2019. DOI.
Neidlin M, Chantzi E, Macheras G, Gustafsson MG, Alexopoulos LG: An ex vivo tissue model of cartilage degradation suggests that cartilage state can be determined from secreted key protein patterns. PLOS ONE, 14(10) 2019. DOI.
Sharma D, Graff CG, Badal A, Zeng R, Sawant P, Sengupta A, Dahal E, Badano A: Technical Note: In silico imaging tools from the VICTRE clinical trial. Medical Physics, 46(9):3924-3928, 2019. DOI.
Estrada AC, Yoshida K, Clarke SA, Holmes JW: Longitudinal Reinforcement of Acute Myocardial Infarcts Improves Function by Transmurally Redistributing Stretch and Stress. Journal of Biomechanical Engineering, 142(2) 2019. DOI.
Wesseling M, Van Rossom S, Jonkers I, Henak CR: Subject-specific geometry affects acetabular contact pressure during gait more than subject-specific loading patterns. Computer Methods in Biomechanics and Biomedical Engineering, 22(16):1323-1333, 2019. DOI.
Safa BN, Peloquin JM, Natriello JR, Caplan JL, Elliott DM: Helical fibrillar microstructure of tendon using serial block-face scanning electron microscopy and a mechanical model for interfibrillar load transfer. Journal of The Royal Society Interface, 16(160) 2019. DOI.
Katzengold R, Gefen A: Modelling an adult human head on a donut-shaped gel head support for pressure ulcer prevention. International Wound Journal, 16(6):1398-1407, 2019. DOI.
Muench JR, Thelen DG, Henak CR: Interfibrillar shear behavior is altered in aging tendon fascicles. Biomechanics and Modeling in Mechanobiology, (in press) 2019. DOI.
Li J, Lu Y, Miller SC, Jin Z, Hua X: Development of a finite element musculoskeletal model with the ability to predict contractions of three-dimensional muscles. Journal of Biomechanics, 94:230-234, 2019. DOI.
Melnyk R, Ezzat B, Belfast E, Saba P, Farooq S, Campbell T, McAleavey S, Buckley M, Ghazi A: Mechanical and functional validation of a perfused, robot-assisted partial nephrectomy simulation platform using a combination of 3D printing and hydrogel casting. World Journal of Urology, (in press) 2019. DOI.
Cha K, Petrick N, Pezeshk A, Graff C, Sharma D, Badal A, Sahiner B: Evaluation of data augmentation via synthetic images for improved breast mass detection on mammograms using deep learning. Journal of Medical Imaging, 7(1) 2019. DOI.
Takahashi Y, Yanaoka T, Sugaya H, Basilio AV, Xu P, Ateshian G, Morrison B: Prediction of probability of fatality due to brain injury in traffic accidents. Traffic Injury Prevention, 20(sup1):S27-S31, 2019. DOI.
Guang Y, McGrath TM, Klug NR, Nims RJ, Shih C-C, Bayguinov PO, Guilak F, Pham CTN, Fitzpatrick JAJ, Setton LA: Combined experimental approach and finite element modeling of small molecule transport through joint synovium to measure effective diffusivity. Journal of Biomechanical Engineering, 142(4) 2019. DOI.
Saeed M, Weihs D: Finite element analysis reveals an important role for cell morphology in response to mechanical compression. Biomechanics and Modeling in Mechanobiology, (in press) 2019. DOI.
Basilio AV, Xu P, Takahashi Y, Yanaoka T, Sugaya H, Ateshian GA, Morrison B: Simulating cerebral edema and delayed fatality after traumatic brain injury using triphasic swelling biomechanics. Traffic Injury Prevention, 20(8):820-825, 2019. DOI.
Zhang Y, Folkert MR, Huang X, Ren L, Meyer J, Tehrani JN, Reynolds R, Wang J: Enhancing liver tumor localization accuracy by prior-knowledge-guided motion modeling and a biomechanical model. Quantitative Imaging in Medicine and Surgery, 9(7):1337-1349, 2019. DOI.


Coogan JS, Kim D-G, Bredbenner TL, Nicolella DP: Determination of sex differences of human cadaveric mandibular condyles using statistical shape and trait modeling. Bone, 106(Supplement C):35-41, 2018. DOI.
Ateshian DGA, Shim JJ, Maas SA, Weiss JA: Finite element framework for computational fluid dynamics in FEBio. Journal of Biomechanical Engineering, 140(2):021001-021017, 2018. DOI.
Andriakopoulou CE, Zadpoor AA, Grant MH, Riches PE: Development and mechanical characterisation of self-compressed collagen gels. Materials Science and Engineering: C, 84:243-247, 2018. DOI.
García E, Diez Y, Diaz O, Lladó X, Martí R, Martí J, Oliver A: A step-by-step review on patient-specific biomechanical finite element models for breast MRI to X-ray mammography registration. Medical Physics, 45(1):e6-e31, 2018. DOI.
Peterson T, Müller GB: Developmental finite element analysis of cichlid pharyngeal jaws: Quantifying the generation of a key innovation. PloS one, 13(1):e0189985, 2018. DOI.
Erdemir A, Hunter PJ, Holzapfel GA, Loew LM, Middleton J, Jacobs CR, Nithiarasu P, Löhner R, Wei G, Winkelstein BA, Barocas VH, Guilak F, Ku JP, Hicks JL, Delp SL, Sacks M, Weiss JA, Ateshian GA, Maas SA, et al.: Perspectives on Sharing Models and Related Resources in Computational Biomechanics Research. Journal of Biomechanical Engineering, 140(2):24701-24711, 2018. DOI.
Macklin P, Friedman SH: Open source tools and standardized data in cancer systems biology. bioRxiv, (in press) 2018. DOI.
Lavecchia CE, Espino DM, Moerman KM, Tse KM, Robinson D, Lee PVS, Shepherd DET: Lumbar model generator: a tool for the automated generation of a parametric scalable model of the lumbar spine. Journal of The Royal Society Interface, 15(138) 2018. DOI.
Mei Y, Hurtado DE, Pant S, Aggarwa A: On improving the numerical convergence of highly nonlinear elasticity problems. Computer Methods in Applied Mechanics and Engineering, 337:110-127, 2018. DOI.
Tan RKY, Wang X, Perera SA, Girard MJA: Numerical stress analysis of the iris tissue induced by pupil expansion: Comparison of commercial devices. PloS one, 13(3):e0194141, 2018. DOI.
Elmasry SS, Asfour SS, Travascio F: Finite element study to evaluate the biomechanical performance of the spine after augmenting percutaneous pedicle screw fixation with kyphoplasty in the treatment of burst fractures. Journal of Biomechanical Engineering, 140(6):61005-61007, 2018. DOI.
Bartell LR, Fortier LA, Bonassar LJ, Cohen I, Delco ML: The cardiolipin-stabilizing peptide SS-31 protects chondrocytes from peracute, mechanically-dependent mitochondrial depolarization and preserves christae structure after cartilage injury. Osteoarthritis and Cartilage, 26:S63-S64, 2018. DOI.
Gomez AD, Elsaid N, Stone ML, Zhuo J, Prince JL: Laplace-based modeling of fiber orientation in the tongue. Biomechanics and Modeling in Mechanobiology, 17(4):1119-1130, 2018. DOI.
Hadid A, Gozes G, Atoon A, Gefen A, Epstein Y: Effects of an improved biomechanical backpack strap design on load transfer to the shoulder soft tissues. Journal of Biomechanics, 76:45-52, 2018. DOI.
Eskinazi I, Fregly BJ: A computational framework for simultaneous estimation of muscle and joint contact forces and body motion using optimization and surrogate modeling. Medical Engineering and Physics, 54:56-64, 2018. DOI.
Martin JA, Brandon SCE, Keuler EM, Hermus JR, Ehlers AC, Segalman DJ, Allen MS, Thelen DG: Gauging force by tapping tendons. Nature Communications, 9(1):1592, 2018. DOI.
Friedman R, Haimy A, Gefen A, Epstein Y: Three-dimensional biomimetic head model as a platform for thermal testing of protective goggles for prevention of eye injuries. Clinical Biomechanics, (in press) 2018. DOI.
Asmani M, Velumani S, Li Y, Wawrzyniak N, Hsia I, Chen Z, Hinz B, Zhao R: Fibrotic microtissue array to predict anti-fibrosis drug efficacy. Nature Communications, 9(1):2066, 2018. DOI.
Smith SG, Griffith BE, Zaharoff DA: Analyzing the effects of instillation volume on intravesical delivery using biphasic solute transport in a deformable geometry. Mathematical Medicine and Biology: A Journal of the IMA, (in press) 2018. DOI.
van der Sluis O, Vermeij T, Neggers J, Vossen B, van Maris M, Vanfleteren J, Geers M, Hoefnagels J: From fibrils to toughness: multi-scale mechanics of fibrillating interfaces in stretchable electronics. Materials, 11(2):231, 2018. DOI.
Thirugnanasambandam M, Siminescu D, Escobar GP, Sprague EA, Goins B, Clarke G, Han H, Amezcua K, Adeyinka O, Goergen C, Finol EA: The effect of pentagalloyl glucose on the wall mechanics and inflammatory activity of rat abdominal aortic aneurysms. Journal of Biomechanical Engineering, 140(8):084502-084509, 2018. DOI.
Xu L, Lu Y, Liu Q: Integrating viscoelastic mass spring dampers into position-based dynamics to simulate soft tissue deformation in real time. Royal Society Open Science, 5(2) 2018. DOI.
Groenhuis V, Visentin F, Siepel FJ, Maris BM, Dall’alba D, Fiorini P, Stramigioli S: Analytical derivation of elasticity in breast phantoms for deformation tracking. International Journal of Computer Assisted Radiology and Surgery, (in press) 2018. DOI.
Yang B, O’Connell GD: Swelling of fiber-reinforced soft tissues is affected by fiber orientation, fiber stiffness, and lamella structure. Journal of the Mechanical Behavior of Biomedical Materials, 82:320-328, 2018. DOI.
Wheatley BB, Odegard GM, Kaufman KR, Donahue TLH: Modeling Skeletal Muscle Stress and Intramuscular Pressure: A Whole Muscle Active–Passive Approach. Journal of Biomechanical Engineering, 140(8):81006-81008, 2018. DOI.
Masni A, Tanaka M: Biomechanical investigation on the influence of the regional material degeneration of an intervertebral disc in a lower lumbar spinal unit: A finite element study. Computers in Biology and Medicine, 98:26-38, 2018. DOI.
Renani MS, Rahman M, Cil A, Stylianou AP: Calibrating multibody ulno-humeral joint cartilage using a validated finite element model. Multibody System Dynamics, 44(1):81-91, 2018. DOI.
Azar D, Ohadi D, Rachev A, Eberth JF, Uline MJ, Shazly T: Mechanical and geometrical determinants of wall stress in abdominal aortic aneurysms: A computational study. PloS one, 13(2):e0192032, 2018. DOI.
Danit S, Katsman MY, Ayelet L, Amit G: Effects of humidity on skin friction against medical textiles as related to prevention of pressure injuries. International Wound Journal, (in press) 2018. DOI.
Todd JN, Maak TG, Ateshian GA, Maas SA, Weiss JA: Hip chondrolabral mechanics during activities of daily living: Role of the labrum and interstitial fluid pressurization. Journal of Biomechanics, 69:113-120, 2018. DOI.
Aly OE: A new direction in anastomotic research: should we redesign the ‘angle of sorrow’? International Journal of Colorectal Disease, 33(2):159-162, 2018. DOI.
Cheng J, Zhang LT: A general approach to derive stress and elasticity tensors for hyperelastic isotropic and anisotropic biomaterials. International Journal of Computational Methods, 15(4):1850028, 2018. DOI.
Fessel A, Döbereiner H-G: Nonlinear compliance of elastic layers to indentation. Biomechanics and Modeling in Mechanobiology, 17(2):419-438, 2018. DOI.
Katzengold R, Gefen A: What makes a good head positioner for preventing occipital pressure ulcers. International Wound Journal, 15(2):243-249, 2018. DOI.
Katzengold R, Topaz M, Gefen A: Dynamic computational simulations for evaluating tissue loads applied by regulated negative pressure-assisted wound therapy (RNPT) system for treating large wounds. Journal of Tissue Viability, 27(2):101-113, 2018. DOI.
Stender CJ, Rust E, Martin PT, Neumann EE, Brown RJ, Lujan TJ: Modeling the effect of collagen fibril alignment on ligament mechanical behavior. Biomechanics and Modeling in Mechanobiology, 17(2):543-557, 2018. DOI.
Halloran JP, Sibole SC, Erdemir A: The potential for intercellular mechanical interaction: simulations of single chondrocyte versus anatomically based distribution. Biomechanics and Modeling in Mechanobiology, 17(1):159-168, 2018. DOI.
Soleimani M, Funnell WRJ: Mechanical behaviour of short membranous liquid-filled cylinders under axial loadings. International Journal of Mechanical Sciences, 145:138-144, 2018. DOI.
Woolfenden HC, Baillie AL, Gray JE, Hobbs JK, Morris RJ, Fleming AJ: Models and mechanisms of stomatal mechanics. Trends in Plant Science, 23(9):822-832, 2018. DOI.
Wang X, Eriksson TSE, Ricken T, Pierce DM: On incorporating osmotic prestretch/prestress in image-driven finite element simulations of cartilage. Journal of the Mechanical Behavior of Biomedical Materials, 86:409-422, 2018. DOI.
Zimmerman BK, Ateshian GA: A surface-to-surface finite element algorithm for large deformation frictional contact in FEBio. Journal of Biomechanical Engineering, 140(8):81013-81015, 2018. DOI.
Maas SA, LaBelle SA, Ateshian GA, Weiss JA: A plugin framework for extending the simulation capabilities of FEBio. Biophysical Journal, 115(9):1630-1637, 2018. DOI.
Finley SM, Brodke DS, Spina NT, DeDen CA, Ellis BJ: FEBio finite element models of the human lumbar spine. Computer methods in biomechanics and biomedical engineering, 21(6):444-452, 2018. DOI.
Uemura K, Atkins PR, Maas SA, Peters CL, Anderson AE: Three-dimensional femoral head coverage in the standing position represents that measured in-vivo during gait. Clinical Anatomy, (in press) 2018. DOI.
Hou JC, Maas SA, Weiss JA, Ateshian GA: Finite element formulation of multiphasic shell elements for cell mechanics analyses in FEBio. Journal of Biomechanical Engineering, (in press) 2018. DOI.
Farooqi AR, Bader R, Rienen U van: Numerical study on electromechanics in cartilage tissue with respect to its electrical properties. Tissue Engineering Part B: Reviews, (in press) 2018. DOI.
Bersi MR, Bellini C, Humphrey JD, Avril S: Local variations in material and structural properties characterize murine thoracic aortic aneurysm mechanics. Biomechanics and Modeling in Mechanobiology, (in press) 2018. DOI.
Reuter T, Hurschler C: Biphasic parameter identification of equine articular cartilage from creep indentation data using an optimized 3D FE-based method. Current Directions in Biomedical Engineering, 4(1):481, 2018. DOI.
Gomez AD, Knutsen A, Xing F, Chan D, Lu Y, Pham D, Bayly PV, Prince JL: 3D Measurements of Acceleration-Induced Brain Deformation via Harmonic Phase Analysis and Finite-Element Models. IEEE Transactions on Biomedical Engineering, (in press) 2018. DOI.
Jin Y, Wang X, Zhang L, Jonas JB, Aung T, Schmetterer L, Girard MJA: Modeling the origin of the ocular pulse and its impact on the optic nerve head. Investigative Ophthalmology & Visual Science, 59(10):3997-4010, 2018. DOI.
Ravera EP, Crespo MJ, Catalfamo Formento PA: A subject-specific integrative biomechanical framework of the pelvis for gait analysis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232(11):1083-1097, 2018. DOI.
Voorhees AP, Jan N-J, Hua Y, Yang B, Sigal IA: Peripapillary sclera architecture revisited: A tangential fiber model and its biomechanical implications. Acta Biomaterialia, (in press) 2018. DOI.
Feola AJ, Nelson ES, Myers J, Ethier CR, Samuels BC: The impact of choroidal swelling on optic nerve head deformation. Investigative Ophthalmology & Visual Science, 59(10):4172-4181, 2018. DOI.
Reuter T, Hurschler C: Comparison of biphasic material properties of equine articular cartilage from stress relaxation indentation tests with and without tension-compression nonlinearity. Current Directions in Biomedical Engineering, 4(1):485, 2018. DOI.
García-García O, Cuba-Dorado A, Fernández-Redondo D, López-Chicharro J: Neuromuscular parameters predict the performance in an incremental cycling test. Int J Sports Med, (in press) 2018. DOI.
Wang R, Sarntinoranont M: Biphasic analysis of rat brain slices under creep indentation shows nonlinear tension-compression Behavior. Journal of the Mechanical Behavior of Biomedical Materials, (in press) 2018. DOI.
Jiang J, Peng B: Ultrasonic Methods for Assessment of Tissue Motion in Elastography. In Ultrasound Elastography for Biomedical Applications and Medicine, Editor(s): Nenadic I, Urban M, Greenleaf J, Gennisson J‐L, Bernal M, Tanter M, 2018. DOI.
Martinez-Sanchis S, Ruperez MJ, Nadal E, Pareja E, Brugger S, Borzacchiello D, Lopez-Andujar R, Monserrat C: Estimating the relative stiffness between a hepatic lesion and the liver parenchyma through biomechanical simulations of the breathing process. Mathematical Problems in Engineering, (in press) 2018. DOI.
Barone WR, Knight KM, Moalli PA, Abramowitch SD: Deformation of transvaginal mesh in response to multiaxial loading. Journal of Biomechanical Engineering, 141(2):21001-21008, 2018. DOI.


Gupta V, Lyne DV, Laflin AD, Zabel TA, Barragan M, Bunch JT, Pacicca DM, Detamore MS: Microsphere-based osteochondral scaffolds carrying opposing gradients of decellularized cartilage and demineralized bone matrix. ACS Biomaterials Science & Engineering, 3(9):1955-1963, 2017. DOI.
Meng Q, An S, Damion RA, Jin Z, Wilcox R, Fisher J, Jones A: The effect of collagen fibril orientation on the biphasic mechanics of articular cartilage. Journal of the Mechanical Behavior of Biomedical Materials, 65:439-453, 2017. DOI.
Claeson AA, Barocas VH: Planar biaxial extension of the lumbar facet capsular ligament reveals significant in-plane shear forces. Journal of the Mechanical Behavior of Biomedical Materials, 65:127-136, 2017. DOI.
Haddad SMH, Samani A: A computational model of the left ventricle biomechanics using a composite material approach. International Journal of Engineering Science, 111:61-73, 2017. DOI.
Wheatley BB, Odegard GM, Kaufman KR, Haut Donahue TL: A validated model of passive skeletal muscle to predict force and intramuscular pressure. Biomechanics and Modeling in Mechanobiology, 16(3):1011-1022, 2017. DOI.
Lin B, Moerman KM, McMahan CG, Pasch KA, Herr HM: Low-Cost Methodology for Skin Strain Measurement of a Flexed Biological Limb. IEEE Transactions on Biomedical Engineering, 64(12):2750-2759, 2017. DOI.
Zanelli L, Montanaro A, Carniel EL, Pavan PG, Natali AN: The study of equivalent material parameters in a hyperelastic model. International Journal of Non-Linear Mechanics, 89:142-150, 2017. DOI.
Lorente D, Martínez-Martínez F, Rupérez MJ, Lago MA, Martínez-Sober M, Escandell-Montero P, Martínez-Martínez JM, Martínez-Sanchis S, Serrano-López AJ, Monserrat C, Martín-Guerrero JD: A framework for modelling the biomechanical behaviour of the human liver during breathing in real time using machine learning. Expert Systems with Applications, 71:342-357, 2017. DOI.
Zhang L, Thakku SG, Beotra MR, Baskaran M, Aung T, Goh JCH, Strouthidis NG, Girard MJA: Verification of a virtual fields method to extract the mechanical properties of human optic nerve head tissues in vivo. Biomechanics and Modeling in Mechanobiology, 16(3):871-887, 2017. DOI.
Abraham CL, Knight SJ, Peters CL, Weiss JA, Anderson AE: Patient-specific chondrolabral contact mechanics in patients with acetabular dysplasia following treatment with peri-acetabular osteotomy. Osteoarthritis and Cartilage, 25(5):676-684, 2017. DOI.
Atkins PR, Elhabian SY, Agrawal P, Harris MD, Whitaker RT, Weiss JA, Peters CL, Anderson AE: Quantitative comparison of cortical bone thickness using correspondence-based shape modeling in patients with cam femoroacetabular impingement. Journal of Orthopaedic Research, 35(8):1743-1753, 2017. DOI.
Klennert BJ, Ellis BJ, Maak TG, Kapron AL, Weiss JA: The mechanics of focal chondral defects in the hip. Journal of Biomechanics, 52:31-37, 2017. DOI.
Sakamoto Y, Buchanan RM, Sanchez-Adams J, Guilak F, Sacks MS: On the functional role of valve interstitial cell stress fibers: a continuum modeling approach. J Biomech Eng, 139(2):021007, 2017. DOI.
Laurent C, Ganghoffer J-F, Rahouadj R: An attempt to predict the preferential cellular orientation in any complex mechanical environment. Bioengineering, 4(1):16, 2017. DOI.
Behforootan S, Chatzistergos PE, Chockalingam N, Naemi R: A clinically applicable non-invasive method to quantitatively assess the visco-hyperelastic properties of human heel pad, implications for assessing the risk of mechanical trauma. Journal of the Mechanical Behavior of Biomedical Materials, 68:287-295, 2017. DOI.
Mountris KA, Bert J, Noailly J, Aguilera AR, Valeri A, Pradier O, Schick U, Promayon E, Ballester MAG, Troccaz J, Visvikis D: Modeling the impact of prostate edema on LDR brachytherapy: a Monte Carlo dosimetry study based on a 3D biphasic finite element biomechanical model. Physics in medicine and biology, 62(6):2087, 2017. DOI.
Yu W, Bo P, Jingfeng J: Building an open-source simulation platform of acoustic radiation force-based breast elastography. Physics in medicine and biology, 62(5):1949, 2017. DOI.
Begonia M, Dallas M, Johnson ML, Thiagarajan G: Comparison of strain measurement in the mouse forearm using subject-specific finite element models, strain gaging, and digital image correlation. Biomechanics and Modeling in Mechanobiology, 16(4):1243-1253, 2017. DOI.
Jia F, Ben Amar M, Billoud B, Charrier B: Morphoelasticity in the development of brown alga Ectocarpus siliculosus: from cell rounding to branching. Journal of The Royal Society Interface, 14(127) 2017. DOI.
Knight SJ, Abraham CL, Peters CL, Weiss JA, Anderson AE: Changes in chondrolabral mechanics, coverage, and congruency following peri-acetabular osteotomy for treatment of acetabular retroversion: A patient-specific finite element study. Journal of Orthopaedic Research, 35(11):2567-2576, 2017. DOI.
Aggarwal A: An improved parameter estimation and comparison for soft tissue constitutive models containing an exponential function. Biomechanics and Modeling in Mechanobiology, 16(4):1309-1327, 2017. DOI.
Kim D-G, Haghighi A, Kwon H-J, Coogan JS, Nicolella DP, Johnson TB, Kim HD, Kim N, Agnew AM: Sex dependent mechanical properties of the human mandibular condyle. Journal of the Mechanical Behavior of Biomedical Materials, 71:184-191, 2017. DOI.
Berger L, Bordas R, Kay D, Tavener S: A stabilized finite element method for finite-strain three-field poroelasticity. Computational Mechanics, 60(1):51-68, 2017. DOI.
Subramaniam DR, Mylavarapu G, Fleck RJ, Amin RS, Shott SR, Gutmark EJ: Effect of airflow and material models on tissue displacement for surgical planning of pharyngeal airways in pediatric down syndrome patients. Journal of the Mechanical Behavior of Biomedical Materials, 71:122-135, 2017. DOI.
Rausch MK, Humphrey JD: A computational model of the biochemomechanics of an evolving occlusive thrombus. Journal of Elasticity, 129(1-2):125-144, 2017. DOI.
Feng Y, Qiu S, Xia X, Ji S, Lee C-H: A computational study of invariant I5 in a nearly incompressible transversely isotropic model for white matter. Journal of Biomechanics, 57:146-151, 2017. DOI.
Westervelt AR, Fernandez M, House M, Vink J, Nhan-Chang C-L, Wapner R, Myers KM: A Parameterized Ultrasound-Based Finite Element Analysis of the Mechanical Environment of Pregnancy. Journal of Biomechanical Engineering, 139(5):51004-51015, 2017. DOI.
Wang X, Fisher LK, Milea D, Jonas JB, Girard MJA: Predictions of optic nerve traction forces and peripapillary tissue stresses following horizontal eye movements predictions of optic nerve traction forces. Investigative Ophthalmology & Visual Science, 58(4):2044-2053, 2017. DOI.
Rausch MK, Genet M, Humphrey JD: An augmented iterative method for identifying a stress-free reference configuration in image-based biomechanical modeling. Journal of Biomechanics, 58:227-231, 2017. DOI.
Hollister SJ, Hollister MP, Hollister SK: Computational modeling of airway instability and collapse in tracheomalacia. Respiratory Research, 18(1):62, 2017. DOI.
Voorhees AP, Jan NJ, Sigal IA: Effects of collagen microstructure and material properties on the deformation of the neural tissues of the lamina cribrosa. Acta Biomaterialia, 58:278-290, 2017. DOI.
MacManus DB, Pierrat B, Murphy JG, Gilchrist MD: Protection of cortex by overlying meninges tissue during dynamic indentation of the adolescent brain. Acta Biomaterialia, 57:384-394, 2017. DOI.
Arbabi V, Pouran B, Zadpoor AA, Weinans H: An experimental and finite element protocol to investigate the transport of neutral and charged solutes across articular cartilage. J. Vis. Exp, (122):e54984, 2017. DOI.
Wu Y, Cisewski SE, Wei F, She X, Gonzales TS, Iwasaki LR, Nickel JC, Yao H: Fluid pressurization and tractional forces during TMJ disc loading: A biphasic finite element analysis. Orthodontics & Craniofacial Research, 20:151-156, 2017. DOI.
Vasilevich AS, Carlier A, de Boer J, Singh S: How Not To Drown in Data: A Guide for Biomaterial Engineers. Trends in Biotechnology, 35(8):743-755, 2017. DOI.
Lee JK, Huwe LW, Paschos N, Aryaei A, Gegg CA, Hu JC, Athanasiou KA: Tension stimulation drives tissue formation in scaffold-free systems. Nat Mater, 16:864-873, 2017. DOI.
Gomez AD, Zou H, Bowen ME, Liu X, Hsu EW, McKellar SH: Right ventricular fiber structure as a compensatory mechanism in pressure overload: A computational study. Journal of Biomechanical Engineering, 139(8):81004-81010, 2017. DOI.
Maas SA, Ateshian GA, Weiss JA: FEBio: History and Advances. Annual Review of Biomedical Engineering, 19(1):279-299, 2017. DOI.
Atkins PR, Fiorentino NM, Aoki SK, Peters CL, Maak TG, Anderson AE: In vivo measurements of the ischiofemoral space in recreationally active participants during dynamic activities: A high-speed dual fluoroscopy study. The American Journal of Sports Medicine, 45(12):2901-2910, 2017. DOI.
Korenczuk CE, Votava LE, Dhume RY, Kizilski SB, Brown GE, Narain R, Barocas VH: Isotropic Failure Criteria Are Not Appropriate for Anisotropic Fibrous Biological Tissues. Journal of Biomechanical Engineering, 139(7):71008-71010, 2017. DOI.
Xing F, Woo J, Gomez AD, Pham DL, Bayly PV, Stone M, Prince JL: Phase Vector Incompressible Registration Algorithm (PVIRA) for motion estimation from tagged magnetic resonance images. IEEE Transactions on Medical Imaging, 36(10):2116-2128, 2017. DOI.
Iranmanesh F, Nazari MA: Finite element modeling of avascular tumor growth using a stress-driven model. Journal of Biomechanical Engineering, 139(8):81009-81010, 2017. DOI.
Yang B, O’Connell GD: Effect of collagen fibre orientation on intervertebral disc torsion mechanics. Biomechanics and Modeling in Mechanobiology, 16(6):2005-2015, 2017. DOI.
Woolfenden HC, Bourdais G, Kopischke M, Miedes E, Molina A, Robatzek S, Morris RJ: A computational approach for inferring the cell wall properties that govern guard cell dynamics. The Plant Journal, 92(1):5-18, 2017. DOI.
Mix DS, Yang L, Johnson CC, Couper N, Zarras B, Arabadjis I, Trakimas LE, Stoner MC, Day SW, Richards MS: Detecting regional stiffness changes in aortic aneurysmal geometries using pressure-normalized strain. Ultrasound in Medicine & Biology, 43(10):2372-2394, 2017. DOI.
Ichim A-E, Kadle P, Kavan L, Pauly M: Phace: physics-based face modeling and animation. ACM Trans. Graph., 36(4):1-14, 2017. DOI.
Tonutti M, Gras G, Yang G-Z: A machine learning approach for real-time modelling of tissue deformation in image-guided neurosurgery. Artificial Intelligence in Medicine, 80:39-47, 2017. DOI.
Carter R, Woolfenden H, Baillie A, Amsbury S, Carroll S, Healicon E, Sovatzoglou S, Braybrook S, Gray JE, Hobbs J, Morris RJ, Fleming AJ: Stomatal opening involves polar, not radial, stiffening of guard cells. Current Biology, 27(19):2974-2983, 2017. DOI.
Wang K, Johnstone MA, Xin C, Song S, Padilla S, Vranka JA, Acott TS, Zhou K, Schwaner SA, Wang RK, Sulchek T, Ethier CR: Estimating human trabecular meshwork stiffness by numerical modeling and advanced OCT imaging. Investigative Ophthalmology & Visual Science, 58(11):4809-4817, 2017. DOI.
Renani MS, Rahman M, Cil A, Stylianou AP: Ulna-humerus contact mechanics: Finite element analysis and experimental measurements using a tactile pressure sensor. Medical engineering & physics, 50:22-28, 2017. DOI.
Peko Cohen L, Gefen A: Deep tissue loads in the seated buttocks on an off-loading wheelchair cushion versus air-cell-based and foam cushions: finite element studies. International Wound Journal, 14(6):1327-1334, 2017. DOI.
Voorhees AP, Jan N-J, Austin ME, Flanagan JG, Sivak JM, Bilonick RA, Sigal IA: Lamina cribrosa pore shape and size as predictors of neural tissue mechanical insult. Investigative Ophthalmology & Visual Science, 58(12):5336-5346, 2017. DOI.
Macmanus DB, Pierrat B, Murphy JG, Gilchrist MD: Region and species dependent mechanical properties of adolescent and young adult brain tissue. Scientific Reports, 7(1):13729, 2017. DOI.
Schneider MTY, Zhang J, Crisco JJ, Weiss A-PC, Ladd AL, Mithraratne K, Nielsen P, Besier T: Trapeziometacarpal joint contact varies between men and women during three isometric functional tasks. Medical Engineering and Physics, 50:43-49, 2017. DOI.
Levy A, Schwartz D, Gefen A: The contribution of a directional preference of stiffness to the efficacy of prophylactic sacral dressings in protecting healthy and diabetic tissues from pressure injury: computational modelling studies. International Wound Journal, 14(6):1370-1377, 2017. DOI.
Meloni GR, Fisher MB, Stoeckl BD, Dodge GR, Mauck RL: Biphasic finite element modeling reconciles mechanical properties of tissue-engineered cartilage constructs across testing platforms. Tissue Engineering Part A, 23(13-14):663-674, 2017. DOI.
Zhang J, Zhong Y, Gu C, Coloe P: Deformable models for surgical simulation: a survey. IEEE Reviews in Biomedical Engineering, 11:143-164, 2017. DOI.
Kotelsky A, Woo CW, Delgadillo LF, Richards MS, Buckley MR: An alternative method to characterize the quasi-static, nonlinear material properties of murine articular cartilage. Journal of Biomechanical Engineering, 140(1):11007-11009, 2017. DOI.
Lustig M, Levy A, Kopplin K, Ovadia-Blechman Z, Gefen A: Beware of the toilet: The risk for a deep tissue injury during toilet sitting. Journal of Tissue Viability, 27(1):23-31, 2017. DOI.


Duan Y, Huang W, Chang H, Chen W, Zhou J, Teo S, Su Y, Chui C, Chang S: Volume preserved mass-spring model with novel constraints for soft tissue deformation. Biomedical and Health Informatics, IEEE Journal of, 20(1):268 - 280, 2016. DOI.
Pierce DM, Unterberger MJ, Trobin W, Ricken T, Holzapfel GA: A microstructurally based continuum model of cartilage viscoelasticity and permeability incorporating measured statistical fiber orientations. Biomechanics and Modeling in Mechanobiology, 15(1):229-244, 2016. DOI.
Tohfafarosh M, Baykal D, Kiel J, Mansmann K, Kurtz SM: Effects of gamma and E-beam sterilization on the chemical, mechanical and tribological properties of a novel hydrogel. Journal of the Mechanical Behavior of Biomedical Materials, 53:250–256, 2016. DOI.
Hou C, Ateshian GA: A Gauss-Kronrod-Trapezoidal integration scheme for modeling biological tissues with continuous fiber distributions. Computer methods in biomechanics and biomedical engineering, 19(8):883-893, 2016. DOI.
Pierrat B, Murphy JG, MacManus DB, Gilchrist MD: Finite element implementation of a new model of slight compressibility for transversely isotropic materials. Computer methods in biomechanics and biomedical engineering, 19(7):745-758, 2016. DOI.
Moerman KM, Simms CK, Nagel T: Control of tension-compression asymmetry in ogden hyperelasticity with application to soft tissue modelling. Journal of the Mechanical Behavior of Biomedical Materials, 56:218–228, 2016. DOI.
Erdemir A: Open Knee: Open source modeling and simulation in knee biomechanics. The journal of knee surgery, 29(2):107-116, 2016. DOI.
Jones B, Hung CT, Ateshian G: Biphasic analysis of cartilage stresses in the patellofemoral joint. The journal of knee surgery, 29(2):92-98, 2016. DOI.
Albro MB, Nims RJ, Durney KM, Cigan AD, Shim JJ, Vunjak-Novakovic G, Hung CT, Ateshian GA: Heterogeneous engineered cartilage growth results from gradients of media-supplemented active TGF-β and is ameliorated by the alternative supplementation of latent TGF-β. Biomaterials, 77:173-185, 2016. DOI.
Erickson DW, Wells JR, Sturgeon GM, Samei E, Dobbins JT, Segars WP, Lo JY: Population of 224 realistic human subject-based computational breast phantoms. Medical physics, 43(1):23-32, 2016. DOI.
Katzengold R, Topaz M, Gefen A: Tissue loads applied by a novel medical device for closing large wounds. Journal of Tissue Viability, 25(1):32-4, 2016. DOI.
Han WM, Heo S-J, Driscoll TP, Delucca JF, McLeod CM, Smith LJ, Duncan RL, Mauck RL, Elliott DM: Microstructural heterogeneity directs micromechanics and mechanobiology in native and engineered fibrocartilage. Nat Mater, 54:477-484, 2016. DOI.
Nims RJ, Durney KM, Cigan AD, Dusséaux A, Hung CT, Ateshian GA: Continuum theory of fibrous tissue damage mechanics using bond kinetics: application to cartilage tissue engineering. Interface Focus, 6(1):20150063, 2016. DOI.
Sakamoto Y, Buchanan RM, Sacks MS: On intrinsic stress fiber contractile forces in semilunar heart valve interstitial cells using a continuum mixture model. Journal of the Mechanical Behavior of Biomedical Materials, 54:244-258, 2016. DOI.
Katzengold R, Zaharov E, Gefen A: Analytical and computational modeling of early penetration of non-enveloped icosahedral viruses into cells. Technology and Health Care, 24(4):483-493, 2016. DOI.
Sengeh DM, Moerman KM, Petron A, Herr H: Multi-material 3-D viscoelastic model of a transtibial residuum from in-vivo indentation and MRI data. Journal of the Mechanical Behavior of Biomedical Materials, 59:379-392, 2016. DOI.
Morrill EE, Tulepbergenov AN, Stender CJ, Lamichhane R, Brown RJ, Lujan TJ: A validated software application to measure fiber organization in soft tissue. Biomechanics and Modeling in Mechanobiology, 15(6):1467-1478, 2016. DOI.
Moore AC, DeLucca JF, Elliott DM, Burris DL: Quantifying cartilage compressive modulus, tensile modulus, and permeability with Hertzian biphasic creep. Journal of Tribology, 138(4):041405, 2016. DOI.
Yoshida K, Mahendroo M, Vink J, Wapner R, Myers K: Material properties of mouse cervical tissue in normal gestation. Acta Biomaterialia, 36:195-209, 2016. DOI.
Nover AB, Jones BK, Yu WT, Donovan DS, Podolnick JD, Cook JL, Ateshian GA, Hung CT: A puzzle assembly strategy for fabrication of large engineered cartilage tissue constructs. Journal of Biomechanics, 49(5):668-677, 2016. DOI.
Saeed M, Sharabani-Yosef O, Weihs D, Gefen A: A phase-contrast microscopy-based method for modeling the mechanical behavior of mesenchymal stem cells. Computer Methods in Biomechanics and Biomedical Engineering, 19(13):1359-1362, 2016. DOI.
OReilly A, Hankenson KD, Kelly DJ: A computational model to explore the role of angiogenic impairment on endochondral ossification during fracture healing. Biomechanics and Modeling in Mechanobiology, 15(5):1279-1294, 2016. DOI.
Levy A, Kopplin K, Gefen A: Device-related pressure ulcers from a biomechanical perspective. Journal of Tissue Viability, 26(1):57-68, 2016. DOI.
Maas SA, Ellis BJ, Rawlins DS, Weiss JA: Finite element simulation of articular contact mechanics with quadratic tetrahedral elements. Journal of Biomechanics, 49(5):659-667, 2016. DOI.
Sturgeon GM, Kiarashi N, Lo JY, Samei E, Segars WP: Finite-element modeling of compression and gravity on a population of breast phantoms for multimodality imaging simulation. Medical Physics, 43(5):2207-2217, 2016. DOI.
Feola AJ, Myers JG, Raykin J, Mulugeta L, Nelson ES, Samuels BC, Ethier CR: Finite element modeling of factors influencing optic nerve head deformation due to intracranial pressure. Investigative Ophthalmology & Visual Science, 57(4):1901-1911, 2016. DOI.
Li J, Hua X, Jones AC, Williams S, Jin Z, Fisher J, Wilcox RK: The influence of the representation of collagen fibre organisation on the cartilage contact mechanics of the hip joint. Journal of Biomechanics, 49(9):1679-1685, 2016. DOI.
Wu JZ, Herzog W, Federico S: Finite element modeling of finite deformable, biphasic biological tissues with transversely isotropic statistically distributed fibers: toward a practical solution. Zeitschrift für angewandte Mathematik und Physik, 67(2):1-19, 2016. DOI.
Arbabi V, Pouran B, Weinans H, Zadpoor AA: Multiphasic modeling of charged solute transport across articular cartilage: Application of multi-zone finite-bath model. Journal of Biomechanics, 49(9):1510-1517, 2016. DOI.
Maas SA, Erdemir A, Halloran JP, Weiss JA: A general framework for application of prestrain to computational models of biological materials. Journal of the Mechanical Behavior of Biomedical Materials, 61:499-510, 2016. DOI.
Shoham N, Levy A, Shabshin N, Benayahu D, Gefen A: A multiscale modeling framework for studying the mechanobiology of sarcopenic obesity. Biomechanics and Modeling in Mechanobiology, 16(1):275-295, 2016. DOI.
Pfeiffer FM: The use of finite element analysis to enhance research and clinical practice in orthopedics. J Knee Surg, 29(02):149-158, 2016. DOI.
Carniel EL, Frigo A, Costantini M, Giuliani T, Nicoletti L, Merigliano S, Natali AN: A physiological model for the investigation of esophageal motility in healthy and pathologic conditions. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230(9):892-899, 2016. DOI.
Miguel E, Miraut D, Otaduy MA: Modeling and estimation of energy-based hyperelastic objects. Computer Graphics Forum, 35(2):385-396, 2016. DOI.
Wang X, Rumpel H, Lim WEH, Baskaran M, Perera SA, Nongpiur ME, Aung T, Milea D, Girard MJA: Finite element analysis predicts large optic nerve head strains during horizontal eye movements. Investigative Ophthalmology & Visual Science, 57(6):2452-2462, 2016. DOI.
Goyens J, Dirckx J, Aerts P: Jaw morphology and fighting forces in stag beetles. The Journal of Experimental Biology, 219(18):2955-2961, 2016. DOI.
Moreau B, Vergari C, Gad H, Sandoz B, Skalli W, Laporte S: Non-invasive assessment of human multifidus muscle stiffness using ultrasound shear wave elastography: A feasibility study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230(8):809-814, 2016. DOI.
Chooi KY, Comerford A, Sherwin SJ, Weinberg PD: Intimal and medial contributions to the hydraulic resistance of the arterial wall at different pressures: a combined computational and experimental study. Journal of The Royal Society Interface, 13(119) 2016. DOI.
Mukherjee K, Gupta S: The effects of musculoskeletal loading regimes on numerical evaluations of acetabular component. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230(10):918-929, 2016. DOI.
Arbabi V, Pouran B, Weinans H, Zadpoor AA: Combined inverse-forward artificial neural networks for fast and accurate estimation of the diffusion coefficients of cartilage based on multi-physics models. Journal of Biomechanics, 49(13):2799-2805, 2016. DOI.
O’Reilly A, Kelly DJ: Unravelling the role of mechanical stimuli in regulating cell fate during osteochondral defect repair. Annals of Biomedical Engineering, 44(12):3446-3459, 2016. DOI.
Rosen D, Wang Y, Jiang J: Virtual breast quasi-static elastography (VBQE): a case study in contrast transfer efficiency of viscoelastic imaging. Ultrasonic Imaging, 39(2):108-125, 2016. DOI.
Claeson AA, Barocas VH: Computer simulation of lumbar flexion shows shear of the facet capsular ligament. The Spine Journal, 17(1):109-119, 2016. DOI.
Choudhari C, Herblum R, Akens MK, Moore S, Hardisty M, Whyne CM: Post-euthanasia micro-computed tomography–based strain analysis is able to represent quasi-static in vivo behavior of whole vertebrae. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230(9):900-904, 2016. DOI.
Vittori M, Srot V, Žagar K, Bussmann B, van Aken PA, Čeh M, Štrus J: Axially aligned organic fibers and amorphous calcium phosphate form the claws of a terrestrial isopod (Crustacea). Journal of Structural Biology, 195(2):227-237, 2016. DOI.
Heinen F, Lund ME, Rasmussen J, Zee M de: Muscle–tendon unit scaling methods of Hill-type musculoskeletal models: An overview. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230(10):976-984, 2016. DOI.
Soleimani M, Funnell WRJ: Deformation and stability of short cylindrical membranes. International Journal of Mechanical Sciences, 119:266-272, 2016. DOI.
Fan L, Pei S, Lucas Lu X, Wang L: A multiscale 3D finite element analysis of fluid/solute transport in mechanically loaded bone. Bone Research, 4:16032, 2016. DOI.
MacLeod AR, Rose H, Gill HS: A validated open-source multi-solver fourth generation composite femur model. Journal of Biomechanical Engineering, 138(12):124501-124510, 2016. DOI.
Shi Y, Qin H, Yang S, Xing D: Thermally confined shell coating amplifies the photoacoustic conversion efficiency of nanoprobes. Nano Research, 9(12):3644-3655, 2016. DOI.
Weis JA, Miga MI, Yankeelov TE: Three-dimensional image-based mechanical modeling for predicting the response of breast cancer to neoadjuvant therapy. Computer Methods in Applied Mechanics and Engineering, 314:494-512, 2016. DOI.
O'Reilly A, Kelly DJ: A computational model of osteochondral defect repair following implantation of stem cell laden multiphase scaffolds. Tissue Engineering Part A, 23(1-2):30-42, 2016. DOI.
Smolen C, Quenneville CE: The effect of ankle posture on the load pathway through the hindfoot. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230(11):1024-1035, 2016. DOI.
Simms C, Kilroy H, Blackburn G, Takaza M: The influence of physical dimension on apparent stress–strain behaviour of in vitro passive skeletal muscle samples. The Journal of Strain Analysis for Engineering Design, 52(1):3-11, 2016. DOI.
Vossen BG, van der Sluis O, Schreurs PJG, Geers MGD: High toughness fibrillating metal-elastomer interfaces: On the role of discrete fibrils within the fracture process zone. Engineering Fracture Mechanics, 164:93-105, 2016. DOI.
Suter T, Kolz CW, Tashjian RZ, Henninger HB, Gerber Popp A: Humeral head osteotomy in shoulder arthroplasty: a comparison between anterosuperior and inferoanterior resection techniques. Journal of Shoulder and Elbow Surgery, 26(2):343-351, 2016. DOI.
Atkins PR, Fiorentino NM, Fauver SJ, Aoki SK, Peters CL, Maak T, Anderson AE: In-vivo measurements of ischiofemoral distance in recreationally active subjects during dynamic activities: A high-speed dual-fluoroscopy study. Journal of Hip Preservation Surgery, 3:suppl 1, 2016. DOI.
Bogovič V, Svete A, Bajsić I: Effects of a drill diameter on the temperature rise in a bone during implant site preparation under clinical conditions. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230(10):907-917, 2016. DOI.
Rausch MK, Karniadakis GE, Humphrey JD: Modeling soft tissue damage and failure using a combined particle/continuum approach. Biomechanics and Modeling in Mechanobiology, 16(1):249-261, 2016. DOI.
Klika V, Gaffney EA, Chen Y-C, Brown CP: An overview of multiphase cartilage mechanical modelling and its role in understanding function and pathology. Journal of the Mechanical Behavior of Biomedical Materials, 62:139-157, 2016. DOI.
Pataky TC, Koseki M, Cox PG: Probabilistic biomechanical finite element simulations: whole-model classical hypothesis testing based on upcrossing geometry. PeerJ Computer Science, 2:e96, 2016. DOI.
Sakamoto Y, Buchanan RM, Adams JS, Guilak F, Sacks MS: Modeling the functional role of valve interstitial cell stress fibers. Journal of Biomechanical Engineering, 39(2):021007, 2016. DOI.
Fu W, Tian X, Sturgeon G, Agasthya G, Segars WP, Goodsitt MM, Kazerooni EA, Samei E: CT breast dose reduction with the use of breast positioning and organ-based tube current modulation. Medical physics, 44(2):665-678, 2016. DOI.
van der Meijden A, Kleinteich T: A biomechanical view on stinger diversity in scorpions. Journal of Anatomy, 230(4):497-509, 2016. DOI.
Gonzalez-Rodriguez D, Guillou L, Cornat F, Lafaurie-Janvore J, Babataheri A, de Langre E, Barakat AI, Husson J: Mechanical Criterion for the Rupture of a Cell Membrane under Compression. Biophysical journal, 111(12):2711-2721, 2016. DOI.
DiDomenico CD, Xiang Wang Z, Bonassar LJ: Cyclic mechanical loading enhances transport of antibodies into articular cartilage. Journal of Biomechanical Engineering, 139(1):11012, 2016. DOI.
Levy A, Fader M, Bader D, Gefen A: Penile compression clamps: A model of the internal mechanical state of penile soft tissues. Neurourology and Urodynamics, 36(6):1645-1650, 2016. DOI.
Gill R, MacLeod A: Data set for a validated open-source multi-solver fourth generation composite femur model. U of Bath, 2016. DOI.


Edgar LT, Maas SA, Guilkey JE, Weiss JA: A coupled model of neovessel growth and matrix mechanics describes and predicts angiogenesis in vitro. Biomechanics and Modeling in Mechanobiology, 14(4):767-782, 2015. DOI.
Bennetts CJ, Sibole S, Erdemir A: Automated generation of tissue-specific three-dimensional finite element meshes containing ellipsoidal cellular inclusions. Computer methods in biomechanics and biomedical engineering, 18(12):1293-1304, 2015. DOI.
Katzengold R, Shoham N, Benayahu D, Gefen A: Simulating single cell experiments in mechanical testing of adipocytes. Biomechanics and Modeling in Mechanobiology, 14(3):537-547, 2015. DOI.
Mihai LA, Goriely A: Finite deformation effects in cellular structures with hyperelastic cell walls. International Journal of Solids and Structures, 53:107–128, 2015. DOI.
Li F, Porikli F: Biomechanical model-based 4DCT simulation. Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, 3(4):222-233, 2015. DOI.
Tsouknidas A, Maliaris G, Savvakis S, Michailidis N: Anisotropic post-yield response of cancellous bone simulated by stress–strain curves of bulk equivalent structures. Computer methods in biomechanics and biomedical engineering, 18(8):839-846, 2015. DOI.
Asher R, Gefen A, Moisseiev E, Varssano D: An analytical approach to corneal mechanics for determining practical, clinically-meaningful patient-specific tissue mechanical properties in the rehabilitation of vision. Annals of biomedical engineering, 42(2):274-286, 2015. DOI.
Fisher MB, Belkin NS, Milby AH, Henning EA, Bostrom M, Kim M, Pfeifer C, Meloni G, Dodge GR, Burdick JA: Cartilage repair and subchondral bone remodeling in response to focal lesions in a mini-pig model: implications for tissue engineering. Tissue Engineering Part A, 21(3-4):850-860, 2015. DOI.
Ateshian GA, Henak CR, Weiss JA: Toward patient-specific articular contact mechanics. Journal Of Biomechanics, 48(5):779–786, 2015. DOI.
Campbell IC, Coudrillier B, Mensah J, Abel RL, Ethier CR: Automated segmentation of the lamina cribrosa using Frangi's filter: a novel approach for rapid identification of tissue volume fraction and beam orientation in a trabeculated structure in the eye. Journal of The Royal Society Interface, 12(104):20141009, 2015. DOI.
Shoham N, Mor-Yossef Moldovan L, Benayahu D, Gefen A: Multiscale Modeling of Tissue-Engineered Fat: Is there a Deformation-Driven Positive Feedback Loop in Adipogenesis? Tissue Engineering Part A, 21(7-8):1354-1363, 2015. DOI.
Levy A, Frank MB-O, Gefen A: The biomechanical efficacy of dressings in preventing heel ulcers. Journal of Tissue Viability, 24(1):1-11, 2015. DOI.
Ateshian GA: Viscoelasticity using reactive constrained solid mixtures. Journal of Biomechanics, 48(6):941–947, 2015. DOI.
Virgilio KM, Martin KS, Peirce SM, Blemker SS: Multiscale models of skeletal muscle reveal the complex effects of muscular dystrophy on tissue mechanics and damage susceptibility. Interface Focus, 5(2) 2015. DOI.
Garbey M, Rahman M, Berceli S: A Multiscale Computational Framework to Understand Vascular Adaptation. Journal of Computational Science, 8:32–47, 2015. DOI.
Moyer CB, Norton PT, Ferguson JD, Holmes JW: Changes in global and regional mechanics due to atrial fibrillation: Insights from a coupled finite-element and circulation model. Annals of biomedical engineering, 43(7):1600-1613, 2015. DOI.
Hortin M, Graham S, Boatwright K, Hyoung P, Bowden A: Transversely isotropic material characterization of the human anterior longitudinal ligament. Journal of the Mechanical Behavior of Biomedical Materials, 45:75-82, 2015. DOI.
Moore AC, Zimmerman BK, Chen X, Lu XL, Burris DL: Experimental characterization of biphasic materials using rate-controlled Hertzian indentation. Tribology International, 89:2-8, 2015. DOI.
Erdemir A, Bennetts C, Davis S, Reddy A, Sibole S: Multiscale cartilage biomechanics: technical challenges in realizing a high-throughput modelling and simulation workflow. Interface Focus, 5(2) 2015. DOI.
Wang B, Roach KE, Kapron AL, Fiorentino NM, Saltzman CL, Singer M, Anderson AE: Accuracy and feasibility of high-speed dual fluoroscopy and model-based tracking to measure in-vivo ankle arthrokinematics. Gait & Posture, 41(4):888–893, 2015. DOI.
Zhou ZR, Jin ZM: Biotribology: Recent progresses and future perspectives. Biosurface and Biotribology, 1(1):3–24, 2015. DOI.
Myers KM, Hendon CP, Gan Y, Yao W, Yoshida K, Fernandez M, Vink J, Wapner RJ: A continuous fiber distribution material model for human cervical tissue. Journal of Biomechanics, 48(9):1533-40, 2015. DOI.
Arbabi V, Pouran B, Weinans H, Zadpoor AA: Transport of neutral solute across articular cartilage: the role of zonal diffusivities. Journal of Biomechanical Engineering, 137(7):071001, 2015. DOI.
Merrell AJ, Ellis BJ, Fox ZD, Lawson JA, Weiss JA, Kardon G: Muscle connective tissue controls development of the diaphragm and is a source of congenital diaphragmatic hernias. Nat Genet, 47(5):496–504, 2015. DOI.
Windhagen H, Chincisan A, Choi HF, Thorey F: Soft-tissue balance in short and straight stem total hip arthroplasty. Orthopedics, 38(3):S14-S20, 2015. DOI.
Ruggiero L, Zimmerman BK, Park M, Han L, Wang L, Burris DL, Lu XL: Roles of the fibrous superficial zone in the mechanical behavior of TMJ condylar cartilage. Annals of biomedical engineering, 43(11):2652-2662, 2015. DOI.
Abraham CL, Bangerter NK, McGavin LS, Peters CL, Drew AJ, Hanrahan CJ, Anderson AE: Accuracy of 3D dual echo steady state (DESS) MR arthrography to quantify acetabular cartilage thickness. Journal of Magnetic Resonance Imaging, 42(5):1329–1338, 2015. DOI.
Salmon R, Garbey M, Moore LW, Bass BL: Interrogating a multifactorial model of breast conserving therapy with clinical data. PloS one, 10(4):e0125006, 2015. DOI.
Vossen BG, van der Sluis O, Schreurs PJG, Geers MGD, Neggers J, Hoefnagels JPM: On the role of fibril mechanics in the work of separation of fibrillating interfaces. Mechanics of Materials, 88:1-11, 2015. DOI.
Briggs BN, Stender ME, Muljadi PM, Donnelly M, Winn VD, Ferguson VL: A hertzian contact mechanics based formulation to improve ultrasound elastography assessment of uterine cervical tissue stiffness. Journal of Biomechanics, 48(9):1524-32, 2015. DOI.
Müter D, Sørensen HO, Oddershede J, Dalby KN, Stipp SLS: Microstructure and micromechanics of the heart urchin test from X-ray tomography. Acta Biomaterialia, 23:21–26, 2015. DOI.
Travascio F, Asfour S, Gjolaj J, Latta LL, Elmasry S: Implications of decompressive surgical procedures for lumbar spine stenosis on the biomechanics of the adjacent segment: a finite element analysis. Journal of Spine, 4(220) 2015. DOI.
Guilie J, Thien-Nga L, Le Tallec P: Micro-sphere model for strain-induced crystallisation and three dimensional applications. Journal of the Mechanics and Physics of Solids, 81:58–74, 2015. DOI.
Mak M, Kim T, Zaman MH, Kamm RD: Multiscale mechanobiology: computational models for integrating molecules to multicellular systems. Integrative Biology, 7(10):1093-1108, 2015. DOI.
Edgar LT, Hoying JB, Weiss JA: In silico investigation of angiogenesis with growth and stress generation coupled to local extracellular matrix density. Annals of biomedical engineering, 43(7):1531-1542, 2015. DOI.
Shoham N, Levy A, Kopplin K, Gefen A: Contoured foam cushions cannot provide long-term protection against pressure-ulcers for individuals with a spinal cord injury: modeling studies. Advances in Skin & Wound Care, 28(7):303-316, 2015. DOI.
Soons J, Genbrugge A, Podos J, Adriaens D, Aerts P, Dirckx J, Herrel A: Is Beak Morphology in Darwin’s Finches Tuned to Loading Demands? PloS one, 10(6):e0129479, 2015. DOI.
Mihai LA, Alayyash K, Goriely A: Paws, pads and plants: the enhanced elasticity of cell-filled load-bearing structures. Proc. R. Soc. A, 471(2178) 2015. DOI.
Nguyen TD, Ethier CR: Biomechanical assessment in models of glaucomatous optic neuropathy. Experimental Eye Research, 141:125-38, 2015. DOI.
Goyens J, Dirckx J, Aerts P: Built to fight: variable loading conditions and stress distribution in stag beetle jaws. Bioinspiration & Biomimetics, 10(4) 2015. DOI.
Pitikakis M, Chincisan A, Magnenat-Thalmann N, Cesario L, Parascandolo P, Vosilla L, Viano G: Automatic measurement and visualization of focal femoral cartilage thickness in stress-based regions of interest using three-dimensional knee models. International Journal of Computer Assisted Radiology and Surgery, 11(5):721-732, 2015. DOI.
Huynh A, Molina Espinosa M, Lobo Fenoglietto FL, Singal A, Iaizzo PA: Modeling of Swine Diaphragmatic Tissue Under Uniaxial Loading. Journal of Medical Devices, 9(3):30950, 2015. DOI.
Yang YX, Teo S-K, Van Reeth E, Tan CH, Tham IWK, Poh CL: A hybrid approach for fusing 4D-MRI temporal information with 3D-CT for the study of lung and lung tumor motion. Medical physics, 42(8):4484-4496, 2015. DOI.
Eskinazi I, Fregly BJ: An Open-Source Toolbox for Surrogate Modeling of Joint Contact Mechanics. Biomedical Engineering, IEEE Transactions on, 63(2):269 - 277, 2015. DOI.
Henninger HB, Valdez WR, Scott SA, Weiss JA: Elastin governs the mechanical response of medial collateral ligament under shear and transverse tensile loading. Acta Biomaterialia, 25:304–312, 2015. DOI.
Gomez AD, Bull DA, Hsu EW: Finite-element extrapolation of myocardial structure alterations across the cardiac cycle in rats. Journal of Biomechanical Engineering, 137(10):101010, 2015. DOI.
Pauletti MS, Martinelli M, Cavallini N, Antolin P: Igatools: An Isogeometric Analysis Library. SIAM Journal on Scientific Computing, 37(4):C465-C496, 2015. DOI.
Wang Y, Helminen E, Jiang J: Building a virtual simulation platform for quasistatic breast ultrasound elastography using open source software: A preliminary investigation. Medical physics, 42(9):5453-5466, 2015. DOI.
Phuntsok R, Mazur MD, Ellis BJ, Ravindra VM, Brockmeyer DL: Development and initial evaluation of a finite element model of the pediatric craniocervical junction. Journal of Neurosurgery: Pediatrics, 17(4):497-503, 2015. DOI.
Chen X, Zhou Y, Wang L, Santare MH, Wan LQ, Lu XL: Determining tension–compression nonlinear mechanical properties of articular cartilage from indentation testing. Annals of biomedical engineering, 44(4):1148-1158, 2015. DOI.
Richardson WJ, Holmes JW: Why Is Infarct Expansion Such an Elusive Therapeutic Target? Journal of Cardiovascular Translational Research, 8(7):421-430, 2015. DOI.
Aggarwal A, Sacks MS: An inverse modeling approach for semilunar heart valve leaflet mechanics: exploitation of tissue structure. Biomech Model Mechanobiol, 15(4):909-932, 2015. DOI.
Zhang L, Albon J, Jones H, Gouget CLM, Ethier CR, Goh JCH, Girard MJA: Collagen microstructural factors influencing optic nerve head biomechanics. Investigative Ophthalmology & Visual Science, 56(3):2031-2042, 2015. DOI.
Mohan N, Gupta V, Sridharan BP, Mellott AJ, Easley JT, Palmer RH, Galbraith RA, Key VH, Berkland CJ, Detamore MS: Microsphere-based gradient implants for ostaeochondral regeneration: a long-term study in sheep. Regenerative Medicine, 10(6):709-728, 2015. DOI.
Begonia MT, Dallas M, Vizcarra B, Liu Y, Johnson ML, Thiagarajan G: Non-contact strain measurement in the mouse forearm loading model using digital image correlation (DIC). Bone, 81:593–601, 2015. DOI.
Gomez AD, Bull DA, Hsu EW: Finite-element extrapolation of myocardial structure alterations across the cardiac cycle in rats. J Biomech Eng, 137(10):101010, 2015. DOI.
Fernandez M, House M, Jambawalikar S, Zork N, Vink J, Wapner R, Myers K: Investigating the mechanical function of the cervix during pregnancy using finite element models derived from high-resolution 3D MRI. Computer methods in biomechanics and biomedical engineering, 19(4):404-417, 2015. DOI.
Becher C, Ricklefs M, Willbold E, Hurschler C, Abedian R: Electromechanical assessment of human knee articular cartilage with compression-induced streaming potentials. Cartilage, 7(1):62-69, 2015. DOI.
Tehrani JN, Yang Y, Werner R, Lu W, Low D, Guo X, Wang J: Sensitivity of tumor motion simulation accuracy to lung biomechanical modeling approaches and parameters. Physics in medicine and biology, 60(22):8833, 2015. DOI.
Ben-Or Frank M, Shoham N, Benayahu D, Gefen A: Effects of accumulation of lipid droplets on load transfer between and within adipocytes. Biomechanics and Modeling in Mechanobiology, 14(1):15-28, 2015. DOI.
Hadid A, Belzer N, Shabshin N, Zeilig G, Gefen A, Epstein Y: The effect of mechanical strains in soft tissues of the shoulder during load carriage. Journal of Biomechanics, 48(15):4160-4165, 2015. DOI.
Goyens J, Dirckx J, Aerts P: Mechanoreceptor distribution in stag beetle jaws corresponds to the material stress in fights. Arthropod Structure & Development, 44(3):201-208, 2015. DOI.
Assassi L, Magnenat-Thalmann N: Assessment of cartilage contact pressure and loading in the hip joint during split posture. International Journal of Computer Assisted Radiology and Surgery, 11(5):745-756, 2015. DOI.
Gannon AR, Nagel T, Bell AP, Avery NC, Kelly DJ: Postnatal changes to the mechanical properties of articular cartilage are driven by the evolution of its collagen network. Eur Cell Mater, 29:105-121, 2015.
O'Reilly A, Kelly DJ: Role of oxygen as a regulator of stem cell fate during the spontaneous repair of osteochondral defects. Journal of Orthopaedic Research, 34(6):1026-1036, 2015. DOI.
Hadid A, Belzer N, Shabshin N, Epstein Y, Gefen A: Deformations in the shoulder tissues during load carriage: A computational model. The Journal of Strength & Conditioning Research, 29:S144-S148, 2015. DOI.
Gannon AR, Nagel T, Bell AP, Avery NC, Kelly DJ: The changing role of the superficial region in determining the dynamic compressive properties of articular cartilage during postnatal development. Osteoarthritis and Cartilage, 23(6):975-984, 2015. DOI.
Fiorentino NM, Kutschke MJ, Atkins PR, Foreman KB, Kapron AL, Anderson AE: Accuracy of functional and predictive methods to calculate the hip joint center in young non-pathologic asymptomatic adults with dual fluoroscopy as a reference standard. Annals of biomedical engineering, 44(7):2168-2180, 2015. DOI.
Nims RJ, Cigan AD, Albro MB, Vunjak-Novakovic G, Hung CT-hui, Ateshian GA: Matrix production in large engineered cartilage constructs is enhanced by nutrient channels and excess media supply. Tissue Engineering Part C: Methods, 21(7):747-757, 2015. DOI.


Henak CR, Abraham CL, Anderson AE, Maas SA, Ellis BJ, Peters CL, Weiss JA: Patient-specific analysis of cartilage and labrum mechanics in human hips with acetabular dysplasia. Osteoarthritis and Cartilage, 22(2):210-217, 2014. DOI.
Henak CR, Ateshian GA, Weiss JA: Finite element prediction of transchondral stress and strain in the human hip. Journal of Biomechanical Engineering, 136(2):21021, 2014. DOI.
*Ateshian GA, Nims RJ, Maas SA, Weiss JA: Computational modeling of chemical reactions and interstitial growth and remodeling involving charged solutes and solid-bound molecules. Biomechanics and Modeling in Mechanobiology, 13(5):1105-1120, 2014. DOI.
Swedberg AM, Reese SP, Maas SA, Ellis BJ, Weiss JA: Continuum description of the Poisson's ratio of ligament and tendon under finite deformation. Journal of Biomechanics, 47(12):3201-3209, 2014. DOI.
Edgar LT, Hoying JB, Utzinger U, Underwood CJ, Krishnan L, Baggett BK, Maas SA, Guilkey JE, Weiss JA: Mechanical Interaction of Angiogenic Microvessels With the Extracellular Matrix. Journal of Biomechanical Engineering, 136(2):021001-021016, 2014. DOI.
Underwood CJ, Edgar LT, Hoying JB, Weiss JA: Cell-generated traction forces and the resulting matrix deformation modulate microvascular alignment and growth during angiogenesis. American Journal of Physiology: Heart and Circulatory Physiology, 307(2):H152-64, 2014.
Jacobs NT, Cortes DH, Peloquin JM, Vresilovic EJ, Elliott DM: Validation and application of an intervertebral disc finite element model utilizing independently constructed tissue-level constitutive formulations that are nonlinear, anisotropic, and time-dependent. Journal of Biomechanics, 47(11):2540-2546, 2014. DOI.
Peeters P, Pronost N: A practical framework for generating volumetric meshes of subject-specific soft tissue. The Visual Computer, 30(2):127-137, 2014. DOI.
Cigan AD, Nims RJ, Albro MB, Vunjak-Novakovic G, Hung CT, Ateshian GA: Nutrient channels and stirring enhanced the composition and stiffness of large cartilage constructs. Journal of Biomechanics, 47(16):3847–3854, 2014. DOI.
Choi HF, Chincisan A, Becker M, Magnenat-Thalmann N: Multimodal composition of the digital patient: a strategy for the knee articulation. The Visual Computer, 30(6-8):739-749, 2014. DOI.
Kim C, Mukherjee S, Luchette P, Palffy-Muhoray P: Director orientation in deformed liquid crystal elastomer microparticles. Soft Materials, 12(2):159-165, 2014. DOI.
Roccabianca S, Ateshian GA, Humphrey JD: Biomechanical roles of medial pooling of glycosaminoglycans in thoracic aortic dissection. Biomechanics and Modeling in Mechanobiology, 13(1):13-25, 2014. DOI.
Yoshida K, Reeves C, Vink J, Kitajewski J, Wapner R, Jiang H, Cremers S, Myers K: Cervical collagen network remodeling in normal pregnancy and disrupted parturition in Antxr2 deficient mice. Journal of Biomechanical Engineering, 136(2):21017, 2014. DOI.
Gomez AD, Zou H, Shiu Y-T, Hsu EW: Characterization of regional deformation and material properties of the intact explanted vein by microct and computational analysis. Cardiovascular Engineering and Technology, 5(4):359-370, 2014. DOI.
Noor M, Azizzati SN, Mahmud J: A review on synthetic skin: Materials investigation, experimentation and simulation. Advanced Materials Research, 915:858-866, 2014. DOI.
Li J, Wang Q, Jin Z, Williams S, Fisher J, Wilcox RK: Experimental validation of a new biphasic model of the contact mechanics of the porcine hip. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228(6):547-555, 2014. DOI.
Sánchez CA, Lloyd JE, Fels S, Abolmaesumi P: Embedding digitized fibre fields in finite element models of muscles. Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, 2(4):223-236, 2014. DOI.
de Vries SAH, van Turnhout MC, Oomens CWJ, Erdemir A, Ito K, van Donkelaar CC: Deformation thresholds for chondrocyte death and the protective effect of the pericellular matrix. Tissue Engineering Part A, 20(13-14):1870-1876, 2014. DOI.
van Oers RFM, Rens EG, LaValley DJ, Reinhart-King CA, Merks RMH: Mechanical cell-matrix feedback explains pairwise and collective endothelial cell behavior in vitro. PLoS computational biology, 10(8):e1003774, 2014. DOI.
Lyons M, Winter DC, Simms CK: Mechanical characterisation of porcine rectus sheath under uniaxial and biaxial tension. Journal of Biomechanics, 47(8):1876-1884, 2014. DOI.
Guo H, Shah M, Spilker RL: A finite element implementation for biphasic contact of hydrated porous media under finite deformation and sliding. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228(3):225-236, 2014. DOI.
Von Forell GA, Bowden AE: A damage model for the percutaneous triple hemisection technique for tendo-achilles lengthening. Journal of Biomechanics, 47(13):3354-3360, 2014. DOI.
Vickerton P, Jarvis JC, Gallagher JA, Akhtar R, Sutherland H, Jeffery N: Morphological and histological adaptation of muscle and bone to loading induced by repetitive activation of muscle. Proceedings of the Royal Society B: Biological Sciences, 281(1788):20140786, 2014. DOI.
Browe DP, Voycheck CA, McMahon PJ, Debski RE: Changes to the mechanical properties of the glenohumeral capsule during anterior dislocation. Journal of Biomechanics, 47(2):464-469, 2014. DOI.
Li J, Hua X, Jin Z, Fisher J, Wilcox RK: Influence of clearance on the time-dependent performance of the hip following hemiarthroplasty: A finite element study with biphasic acetabular cartilage properties. Medical engineering & physics, 36(11):1449–1454, 2014. DOI.
Yao W, Yoshida K, Fernandez M, Vink J, Wapner RJ, Ananth CV, Oyen ML, Myers KM: Measuring the compressive viscoelastic mechanical properties of human cervical tissue using indentation. Journal of the Mechanical Behavior of Biomedical Materials, 34:18-26, 2014. DOI.
Goyens J, Soons J, Aerts P, Dirckx J: Finite-element modelling reveals force modulation of jaw adductors in stag beetles. Journal of The Royal Society Interface, 11(101):20140908, 2014. DOI.
Nims RJ, Cigan AD, Albro MB, Hung CT, Ateshian GA: Synthesis rates and binding kinetics of matrix products in engineered cartilage constructs using chondrocyte-seeded agarose gels. Journal of Biomechanics, 47(9):2165-2172, 2014. DOI.
Cortes DH, Jacobs NT, DeLucca JF, Elliott DM: Elastic, permeability and swelling properties of human intervertebral disc tissues: A benchmark for tissue engineering. Journal of Biomechanics, 47(9):2088-2094, 2014. DOI.
Myers K, Ateshian GA: Interstitial growth and remodeling of biological tissues: Tissue composition as state variables. Journal of the Mechanical Behavior of Biomedical Materials, 29:544-556, 2014. DOI.
Freutel M, Schmidt H, Dürselen L, Ignatius A, Galbusera F: Finite element modeling of soft tissues: Material models, tissue interaction and challenges. Clinical Biomechanics, 29(4):363-372, 2014. DOI.
Galbusera F, Freutel M, Dürselen L, D’Aiuto M, Croce D, Villa T, Sansone V, Innocenti B: Material models and properties in the finite element analysis of knee ligaments: a literature review. Biomechanics, 2:54, 2014. DOI.
Li J, Hua X, Jin Z, Fisher J, Wilcox RK: Biphasic investigation of contact mechanics in natural human hips during activities. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228(6):556-563, 2014. DOI.
Matveenko VP, Shardakov IN, Shestakov AP, Wasserman IN: Development of finite element models for studying the electrical excitation of myocardium. Acta Mechanica, 225(9):2699-2715, 2014. DOI.
Galbusera F, Brayda-Bruno M, Wilke HJ: Is post-contrast MRI a valuable method for the study of the nutrition of the intervertebral disc? Journal of Biomechanics, 47(12):3028-3034, 2014. DOI.
DeWall RJ, Jiang J, Wilson JJ, Lee KS: Visualizing tendon elasticity in an exvivo partial tear model. Ultrasound in Medicine and Biology, 40(1):158-167, 2014. DOI.
Rouillard AD, Holmes JW: Coupled agent-based and finite-element models for predicting scar structure following myocardial infarction. Progress in Biophysics and Molecular Biology, 115(2-3):235-243, 2014. DOI.
Shoham N, Girshovitz P, Katzengold R, Shaked NT, Benayahu D, Gefen A: Adipocyte stiffness increases with accumulation of lipid droplets. Biophysical journal, 106(6):1421-1431, 2014. DOI.
Krase A, Abedian R, Steck E, Hurschler C, Richter W: BMP activation and Wnt-signalling affect biochemistry and functional biomechanical properties of cartilage tissue engineering constructs. Osteoarthritis and Cartilage, 22(2):284-292, 2014. DOI.
Mihai LA, Goriely A: Nonlinear Poisson effects in soft honeycombs. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science, 470(2169):20140363, 2014. DOI.
Cooney GM, Moerman KM, Takaza M, Winter DC, Simms CK: Uniaxial and biaxial mechanical properties of porcine linea alba. Journal of the Mechanical Behavior of Biomedical Materials, 41:68-82, 2014. DOI.
Roccabianca S, Bellini C, Humphrey JD: Computational modelling suggests good, bad and ugly roles of glycosaminoglycans in arterial wall mechanics and mechanobiology. Journal of The Royal Society, Interface, 11(97):20140397, 2014. DOI.
Oungoulian SR, Hehir KE, Zhu K, Willis CE, Marinescu AG, Merali N, Ahmad CS, Hung CT, Ateshian GA: Effect of glutaraldehyde fixation on the frictional response of immature bovine articular cartilage explants. Journal of Biomechanics, 47(3):694-701, 2014. DOI.
Gilchrist MD, Murphy JG, Parnell W, Pierrat B: Modelling the slight compressibility of anisotropic soft tissue. International Journal of Solids and Structures, 51(23):3857-3865, 2014. DOI.
Tomic A, Grillo A, Federico S: Poroelastic materials reinforced by statistically oriented fibres—numerical implementation and application to articular cartilage. IMA Journal of Applied Mathematics, 79(5):1027-1059, 2014. DOI.
Asher R, Gefen A, Moisseiev E, Varssano D: Etiology of keratoconus: proposed biomechanical pathogenesis. In Silico Cell and Tissue Science, 1(1):3-12, 2014. DOI.
Meng Q, Jin Z, Wilcox R, Fisher J: Computational investigation of the time-dependent contact behaviour of the human tibiofemoral joint under body weight. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228(11):1193-1207, 2014. DOI.
Levy A, Kopplin K, Gefen A: Computer simulations of efficacy of air-cell-based cushions in protecting against reoccurrence of pressure ulcers. Journal of Rehabilitation Research & Development, 51(8):1297-1310, 2014. DOI.
Goyens J, Soons J, Aerts P, Dierick M, Dirckx J: Unravelling the biomechanics of stag beetle armature using microcomputed X-ray tomography. Microscopy and Analysis, 28(2):16-18, 2014.
Vicente-Campos D, López AM, Nuñez MJ, Chicharro JL: Heart rate recovery normality data recorded in response to a maximal exercise test in physically active men. European Journal of Applied Physiology, 114(6):1123-1128, 2014. DOI.
Levy A, Kopplin K, Gefen A: An air-cell based cushion for pressure ulcer protection remarkably reduces tissue stresses in the seated buttocks with respect to foams: Finite element studies. Journal of Tissue Viability, 23(1):13-23, 2014. DOI.
Henak CR, Kapron AK, Ellis BJ, Maas SA, Anderson AE, Weiss JA: Specimen-specific predictions of contact stress under physiological loading in the human hip: validation and sensitivity studies. Biomechanics and Modeling in Mechanobiology, 13(2):387-400, 2014. DOI.


Gililland JM, Anderson LA, Henninger HB, Kubiak EN, Peters CL: Biomechanical analysis of acetabular revision constructs: is pelvic discontinuity best treated with bicolumnar or traditional unicolumnar fixation? Journal of Arthoplasty, 28(1):178-186, 2013. DOI.
Henak CR, Anderson AE, Weiss JA: Subject-specific analysis of joint contact mechanics: application to the study of osteoarthritis and surgical planning. Journal of Biomechanical Engineering, 135(2):021003, 2013. DOI.
Harris MD, Reese SP, Peters CL, Weiss JA, Anderson AE: Three-dimensional quantification of femoral head shape in controls and patients with cam-type femoroacetabular impingement. Annals of Biomedical Engineering, 41(6):1162-1171, 2013. DOI.
Henak CR, Carruth E, Anderson AE, Harris MD, Ellis BJ, Peters CL, Weiss JA: Finite element predictions of cartilage contact mechanics in hips with retroverted acetabula. Osteoarthritis and Cartilage, 21(10):1522-1529, 2013. DOI.
Reese SP, Ellis BJ, Weiss JA: Micromechanical model of a surrogate for collagenous soft tissues: development, validation, and analysis of mesoscale size effects. Biomechanics and Modeling in Mechanobiology, 12(6):1195-1204, 2013. DOI.
Lefever JA, Garcia JJ, Smith JH: A patient-specific, finite element model for noncommunicating hydrocephalus capable of large deformation. Journal Of Biomechanics, 46(8):1447–1453, 2013.
Bian L, Hou C, Tous E, Rai R, Mauck RL, Burdick JA: The influence of hyaluronic acid hydrogel crosslinking density and macromolecular diffusivity on human MSC chondrogenesis and hypertrophy. Biomaterials, 34(2):413–421, 2013. DOI.
Ateshian GA, Maas SA, Weiss JA: Multiphasic finite element framework for modeling hydrated mixtures with multiple neutral and charged solutes. Journal of Biomechanical Engineering, 135(11):111001, 2013. DOI.
Vergori L, Destrade M, McGarry P, Ogden RW: On anisotropic elasticity and questions concerning its finite element implementation. Computational Mechanics, 52(5):1185-1197, 2013. DOI.
Ní Annaidh A, Destrade M, Gilchrist MD, Murphy JG: Deficiencies in numerical models of anisotropic nonlinearly elastic materials. Biomechanics and Modeling in Mechanobiology, 12(4):781-791, 2013. DOI.